Meg: Pop of Color (DIY)

As glorious as fall colors may be, they can sometimes seem a little dull without a pop of color. I set out the other day to buy a necklace that would give me a pretty pop, but had no luck! Bright colors are slowly being phased out of stores as the season changes so I decided to go ahead and create my own color pop necklace.

You’ll only need a couple of supplies to recreate this look! Here’s what I used:

Poc1

I already had the jewelry wire and the cutters/pliers but both items can be found for a pretty low price at Michaels. The jewelry chain was $3, but I splurged on the beads because I loved the color (I think they were $6 ot $7). The supplies I bought would definitely be enough for two necklaces!

Measure how long or short you’d like your necklace to be and cut the chain to that length. Trim a piece of wire long enough to fit the beads and thread them on. Make sure to leave a couple of inches on either side so you have some wire to wrap around and secure.

Poc2

Poc3

Thread your wire through the last link on the chain, and do your best to wrap the wire until it’s secure. Trim the excess wire. I clamped down the wire so it wouldn’t poke out anymore. (See below for an example)

Poc4

Poc5

Repeat on the other side, and trim any wires that may be poking out. The best thing about this DIY, and all of my DIYs for that matter, is that they don’t have to look perfect! This is definitely not store quality, but it’s exactly what I needed to liven up my fall wardrobe. You can even use string and knots if that works better for you!

Poc6

The finished product:

Poc7

Poc8

What do you do to liven up the warm colors of fall?

Xo-Meg

Post Navigation:

6 Comments

  1. Blog is the New Black on November 1, 2012 at 9:19 pm

    SO crafty! Love this!

  2. Liz @ Tip Top Shape on November 1, 2012 at 9:53 pm

    Too cute!

  3. Melissa on November 2, 2012 at 7:44 am

    LOVE this idea and the finished product! I need to try this. I just discovered your blog and I am really enjoying.

  4. mary @ what's cookin with mary on November 2, 2012 at 10:06 am

    Super cute Meg! I would totally buy something like this. Very very crafty sister.

  5. Mona on November 2, 2012 at 12:08 pm

    very nice!! i think the finished product looks perfect and professional-can’t even tell it’s DIY 🙂

  6. Jes on November 16, 2012 at 11:01 am

    I love this look! =) As someone who makes a TON of jewelry, I have a way to finish off the wire strand to prevent snagging on clothing and such… Rather than wrapping the wire around itself, take the end of the wire in your pliers and make a circle with the wire back onto itself creating a loop. Don’t close it all the way yet, but slide the chain into the loop, then close the circle. This link has what the circle could look like when done.

    http://www.etsy.com/listing/109650673/40x-24-gauge-925-sterling-silver-eye-pin?ref=sr_gallery_1&sref=sr_43fbfaab0286157d7a84ee0aa6dfe5283df9e9620b7535df6e402b9d790a66ac_1353081358_14393981_eye_pin&ga_search_query=eye+pin&ga_view_type=gallery&ga_ship_to=US&ga_search_type=all

    For the way that you wrapped it around the wire, to prevent snagging, you could leave the end a little longer and fish it up the wrapped loop.

Leave a Comment





This site uses Akismet to reduce spam. Learn how your comment data is processed.